Frequently Asked Questions

Yes! Shagun Tyre is an authorized retailer for 100% genuine brand-new tyres with full manufacturer warranty (Apollo, CEAT, JK Tyre, MRF, Bridgestone, GoodYear). We also stock hand-inspected, high-tread second-hand / used tyres tested for structural integrity, making quality automotive rubber accessible for every budget.

Tyres should typically be replaced every 40,000 to 50,000 km or every 4 to 5 years, whichever comes first. You should also replace tyres if tread depth reaches the 1.6mm Tread Wear Indicator (TWI), if you notice rubber sidewall cracking / bulges, or if there is excessive shoulder scrubbing from alignment issues.

We stock radial tyres ranging from compact 13" rims (155/65 R13 for Alto, Santro, WagonR) up to luxury 22" rims (275/50 R22, 285/45 R22, 305/40 R22 for Fortuner, Defender, Range Rover). Popular hatchback, sedan, and compact SUV sizes (14", 15", 16", 17", 18") are always ready in stock for same-day installation.

Yes! We provide attractive trade-in exchange value for your old usable tyres when you purchase a set of new tyres or alloy wheels. The exchange value depends on the remaining tread depth, rubber condition, and rim size of your old tyres.

For plush highway comfort, low road noise, and high-speed braking, Bridgestone Turanza, Continental, and Michelin are outstanding. For rugged durability, pothole resistance, and maximum tread mileage in Indian conditions, Apollo Amazer / Alnac 4G, CEAT SecuraDrive, and MRF ZVTV are customer favorites.

PCD (Pitch Circle Diameter) refers to the diameter of the imaginary circle drawn through the center of all wheel lug bolts (e.g., 4-Hole 100 PCD for Swift/Baleno, or 5-Hole 114.3 PCD for Creta/Seltos/Innova). Matching the exact PCD ensures the alloy wheel bolts flush onto your car’s wheel hub without vibration or stress on wheel studs.

We specialize in premium designer alloy wheels from Neo Wheels, Victor Wheels, Plati Wheels, and Vossen Styles in sizes 13", 14", 15", 16", 17", 18", 20", and 22". Styles include Diamond Cut Machined Face, Deep Concave, Gloss Black, Hyper Silver, and Off-Road Beadlock looks.

When done correctly using professional aspect ratio calculations (Plus-1 or Plus-2 sizing), upgrading your alloy wheels improves steering response, high-speed cornering stability, and aesthetics without harming suspension geometry or throwing off the speedometer.

Always allow the wheels to cool before washing. Use mild car shampoo and soft microfiber cloths with clean water. Avoid harsh acid-based wheel cleaners or wire brushes which can strip the protective clear coat on diamond-cut faces or scratch matte finishes.

3D Wheel Alignment adjusts the angles of your suspension (Camber, Caster, and Toe) so all wheels point straight and roll parallel. Dynamic Wheel Balancing ensures the weight distribution around the tyre circumference is equal by adding precision stick-on weights to eliminate high-speed steering wobble.

Signs include: 1) Your car drifts or pulls to the left or right on a flat road, 2) The steering wheel is crooked when driving straight, 3) Rapid or uneven feathering on the inside or outside tyre edges, and 4) Squealing tyres when taking gentle turns.

A complete computerized 3D laser alignment and 4-wheel dynamic spin balancing typically takes 20 to 30 minutes in our specialized service bay. You can relax in our customer lounge while our certified technicians tune your suspension geometry.

Front tyres experience heavier friction due to steering turns and engine weight, causing faster shoulder wear compared to rear tyres. Rotating tyres in an X-pattern or front-to-back balances out rubber wear across all 4 tyres, extending your overall set life by up to 20%.

Most hatchbacks, sedans, and compact SUVs require between 30 to 35 PSI. Exact factory recommended PSI is stated on the driver-side door jamb sticker. Check tyre pressure once every 2 weeks when tyres are cold for best fuel mileage and uniform tread wear.

We are located at 973/5, Opp. A.C.P. Office, Near Atam Park, Dugri Road, Model Town, Ludhiana, Punjab 140002. Easily accessible from Model Town, Atam Nagar, and Dugri Phase 1 & 2. Get 1-click Google Maps GPS directions on our Contact Page.

We are Open Daily (Monday to Sunday) from 9:00 AM to 8:00 PM. Same-day tyre mounting, computerized 3D alignment, dynamic balancing, and tubeless valve replacements are available all 7 days.

Currently, we provide high-precision calibrated compressed air filling using digital gauges for accurate factory PSI. Nitrogen gas filling unit is currently not active at our workshop.

When you purchase new Apollo, CEAT, Bridgestone, or JK Tyres, we generate an official digital invoice and help register your warranty online with the tyre manufacturer. This provides unconditional warranty coverage against manufacturing defects and road hazard cuts.

We accept all major payment modes including UPI (Google Pay, PhonePe, Paytm, BHIM), Cash, Credit Cards, Debit Cards, and Net Banking.